【China Net】Randy International think tank platform enterprise Yingchuang: 3D print 15 sets of isolation wards in one day to donate to Xianning
On February 12, Randi International think tank platform enterprise Yingchuang Construction Technology Co., Ltd. donated 15 3D printed isolation wards independently developed by it to the Xianning Central People's Hospital in Hubei Province, which solved the urgent needs for front-line medical workers and patients . This is the 15 sets of isolation wards that Yingchuang Construction Technology Co., Ltd. has completed in 3 days, and came to the people of Hubei in the most sincere and simple form.
On February 13, according to the feedback from Mr. Jinxue, the chief of the equipment department of Xianning Central Hospital, the 3D printed isolation ward has been equipped with equipment, connected to power, and arranged for the patient to move in.
At the same time, Yingchuang's technology research and development team is still racing against time to develop a series of 3D printed building products such as the Angels Lounge in White and the Epidemic Prevention Highway on the highway, and will donate to hospitals and places in need.
The picture shows 15 3D printed isolation wards donated by Randi International think tank platform enterprise Yingchuang Construction Technology Co., Ltd. to Xianning Central People's Hospital.
"Ecological toilet": Avoid the transmission of new crown virus through feces
Zhongshan Nan and Academician Li Lanjuan's team isolated new coronaviruses from stool samples of patients with neocoronary pneumonia. The findings suggest that feces may be a new route of transmission of neocoronaviruses. Therefore, proper disposal of the feces of infected persons is essential.
How will 3D printed isolation wards treat patient feces? Ma Yihe, chairman of Yingchuang Construction Technology Co., Ltd., said that each 3D printed isolation ward is carefully equipped with an "ecological toilet". The toilet is designed to automatically separate wet and dry stools without water flushing. The "ecological toilet" is not connected to the outside world, will not be discharged into the sewer, and will not pollute the outside environment. The feces of patients will be recovered 100%, and organic biological bacteria will be used for centralized decomposition and treatment, which is very suitable for the isolation needs of infected patients.
The picture shows the ecological toilet equipped with a 3D printed isolation ward
"Turn waste into treasure": two or three times stronger than traditional houses
Ma Yihe introduced that the 15 3D printed isolation wards donated to Xianning Central People's Hospital were printed in one day. According to the production capacity of all the factories in Yingchuang, up to hundreds of 3D cabins can be printed in a day.
The materials used for 3D printed buildings are not traditional sandstone cement, but some so-called "garbage", such as industrial solid waste and construction solid waste for urban demolition. After the separation and adhesion of impurities through Yingchuang's patented technology, the waste can be turned into a treasure. The strength of this type of building material is two to three times higher than that of traditional reinforced concrete houses.
Ma Yihe said that 3D printed houses are not only strong, airtight, but also very earthquake-resistant. The 3D printed houses currently used to isolate wards can also be used as emergency shelters in the event of future earthquakes and other disasters. Therefore, the 3D printed house used as an isolation ward is very strong and reliable.
The picture shows a 3D printed building material processed from industrial solid waste and urban demolition of construction solid waste.
"Change on demand": sustainable use and wide application scenarios
The 3D printed isolation ward has undoubtedly played an important role in solving the "emergency" in the epidemic situation, but where do these buildings go after the epidemic is over? Will the speed and efficiency of 3D printed buildings cause waste of new space resources and subsequent demolition and reconstruction problems?
Ma Yihe said that since there is no need to lay foundations, 3D printed small buildings can be flexibly moved. The 15 isolation wards sent to Xianning City were hoisted and transported by cranes and trucks. After the epidemic was over, they could be transported to other places where needed. In addition, all 3D printed buildings can be “rebuilt” and broken and reassembled, and their building materials can be recycled and used sustainably.
The picture shows the 3D printed isolation ward hoisting process.
In addition, the advantages of 3D printed buildings in terms of ecological environment protection, flexibility and personalization make them have a wide range of application scenarios. Not only isolation wards, homestays, art cabins, public toilets, bus stations, landscape sculptures, etc. can be easily implemented.
Ma Yihe said that the fight against the epidemic was a common battle for all Chinese. Yingchuang will spare no effort to devote wholeheartedly with the people of the whole country, and make every effort to donate 3D printing products to the places and hospitals in need, and give back to the society with love and dedication.
